The programme begins with registration in the Hub Theatre Foyer and lunch in the Medlar Suite (number 06 on the campus map).
1.30 pm Welcome
13.40 | Michael Kirkham | Ageing of nuclear fuel cladding in advanced gas-cooled reactors |
14.00 | Mitesh Patel | Multiscale modelling of delayed hydride cracking |
14.20 | Ksenija Dvurecenska | Preliminary evaluation of validation metrics for computational mechanics models |
14.40 | Yun-Hao Hsieh | A ceramic wasteform for high-level waste from advanced reprocessing |
15.00 | Matthew Jordan | 3D experimental observation of notch strains in AGR nuclear graphite |
Break | ||
Session 2 | ||
15.40 | Robert Worth | Thermal treatment of UK irradiated graphite waste |
16.00 | Roxanne Neall | The potential for sic-sic composite fuel cladding in PWRS: developing a feasible manufacturing technique |
16.20 | Richard Pearson | Assessment of the technological challenges and opportunities concerning tritium supply and demand in small Tokamaks |
16.40 | A.J. Popel | The effect of radiation damage by fission fragments on structural stability and dissolution of the UO2 fuel matrix |
17.00 | Day 1 close | |
Day 2 April 1 | ||
Session 3 | ||
9.20 | Conor Galvin | Modelling the thermomechanical properties of actinide oxides |
9.40 | Mark Wootton | Collision Cascades in an Iron-Chromium Binary Alloy |
10.00 | A Darbyshire | Control System Modelling of Pyroelectric Neutron Sources, MATLAB/Simulink |
10.20 | George Kwasowski | Developing a methodology for modelling mixed mode failure in nuclear graphite components |
10.40 | Hassan Mohamed | An investigation into the feasibility of utilizing thorium-based fuel cycles in a small fluoride-salt-cooled high-temperature reactor |
Break | ||
Session 4 | ||
11.20 | Matthew Jackson | Study of the intrinsic defects within Be12X materials |
11.40 | Sophie Rennie | Water corrosion of spent nuclear fuel: radiolysis driven dissolution at the UO2/water interface |
12.00 | Kien Trinh | Optimising the Refuelling Strategy for a Denatured Molten Salt Reactor |
12.20 | Susann Hänsch | Micro-scale simulations of nucleate pool boiling |
12.40 | Sebastian Lawson | Radiation effects in Perovskites – The effect of damage |
Lunch | ||
Session 5 | ||
14.00 | Michael Wolfendale | Analytical solutions to the phenomena of electromagnetic flow coupling and heat transfer in fusion blankets and their application to design |
14.20 | Thomas Haynes | Finite element modelling of pellet-clad interaction in advanced gas cooled reactors |
14.40 | M. Kendrick | LES modelling of natural convection flows through inclined geometries, large eddy simulation |
15.00 | David Harland | Modelling of turbulence-induced secondary flows in non-circular channels |
15.20 | Gollam Majumder | Bubble dynamics in high pressure sub-cooled flow |
Break | ||
Session 6 | ||
15.40 | Wenjun Lu | Electropulse-induced microstructural evolution in austenitic stainless steel |
16.00 | Anas Achouri | Improving the spatial resolution of the contour method for residual stress measurement on a hot-rolled ASTM A387 grade 91 steel plate laser welded |
16.20 | Abdullah Al Mamun | Effect of back stress on overall creep lifetime of 316H during operation at nuclear power plants |
16.40 | Benjamin Krawczyk | Effect of surface treatment on the corrosion susceptibility of type 316 stainless steel overpacks |
Day 2 close | ||
19.00 Forum Dinner | ||
Day 3 April 2 | ||
Session 7 | ||
9.20 | Rahul Unnikrishnan | Condition monitoring of structural components in nuclear power plants by electron backscatter diffraction |
9.40 | Benjamin Pearce | Remote, optical detection of alpha-emitters: a study of radioluminescence detection in air |
10.00 | Claudia Gasparrini | Kinetics of oxidation in carbide nuclear reactor fuels |
10.20 | Liam Payne | |
10.40 | Olga Negri | Neutronic and thermal-hydraulic modelling of a molten salt reactor for marine propulsion applications |
11.00 | Ji Soo Ahn | Isogeometric analysis of the MHD flows in a duct |
Conference concluding remarks, presentations and lunch |